The secret to creating natural Agarwood of ATC - KHANH HOA AQUILARIA CRASSNA Co. Ltd

To have precious Agarwood products, ATC - Khanh Hoa Aquilaria Crassna Company Limited has built a raw material area of ​​more than 10,000 hectares, along with Agarwood creation techniques that are completely in accordance with nature.

The first important factor: soil and land location

Mr. Nguyen Van Tuong shared: the reason why domestic farmers grow Agarwood but cannot create Agarwood is because they do not know the creation techniques as well as lack general awareness that creating Agarwood requires the convergence of all the elements: soil, climate, care, Agarwood creation techniques, ... etc.

Our country from Ha Tinh to Phu Quoc has Agarwood and many areas have very good quality. However, not all areas have Agarwood, and Agarwood growing areas must face the sea. However, Agarwood is a soft tree that is easily knocked down by storms, so in areas with frequent storms, we must be very careful to avoid damage.

On the majestic peak of Chu Yang Sin, 2442 meters high, facing the East Sea, are the two districts of Khanh Duong and Khanh Vinh where foresters found a lot of Agarwood and Ky Nam, this place is also the source of the Cai River flowing into the famous and beautiful Nha Trang Bay.

Chu Yang Sin means "Gateway to Heaven" as the locals call it; Khanh Duong used to belong to Khanh Hoa Province, now merged into Daklak Province, renamed M'drak.

Agarwood and Ky Nam here are gathered in the solemn spaces of ATC - Khanh Hoa Aquilaria Crassna Company Limited, where sophisticated crafting techniques are applied, where people are attentive, meticulous, and meticulous, creating miraculous products.

The second important factor: climate

After soil, climate has a great influence on the quality of Agarwood. Agarwood near the sea or on islands has extremely good quality and Khanh Hoa is the land with the best quality in the world.

It is the marine climate with good soil that has created all kinds of trees, including Agarwood. The reason Agarwood in Khanh Hoa is the best is because of the special climate because this place has the harmony between 2 hot and cold ocean currents. Each ocean current brings marine animals and plants with their own characteristics and properties. When two ocean currents merge, they create an even richer flora and fauna, including natural compounds. Natural compounds are created from insects, bacteria, and fungi when they mate or are released during metabolism. These are the conditions in the process of agarwood formation, meaning that natural compounds enter damaged agarwood trees from natural influences such as termites, borers, lightning, storms that break branches, etc.

The third important factor: the time of creating agarwood

With the Agarwood growing movement from 1996-1997, the whole country now has over 30,000 hectares, but in reality many people have failed because they could not create Agarwood. Mr. Tuong pointed out that farmers' failures in creating Agarwood are due to not understanding the technical process. Farmers often like to drill trees (carve trees) so they do not have the right period, the right time for the tree to create Agarwood.

The time to create Agarwood must be after 10 years old, just like humans must reach puberty to be able to reproduce. If we force and coerce, the quality and yield of Agarwood cannot be compared to trees of the right age and following the right process.

The time to create Agarwood should be early summer. Because early summer is the cycle of hot ocean currents, the wind blowing from the sea brings the marine climate, humid rain, nutrients for microorganisms to grow. And winter is the cold ocean current, when blowing, it brings the dry Northeast monsoon (wind from the mainland), there is not much moisture, nutrients for microorganisms to grow.

The fourth important factor: Agarwood creation technique

To create Agarwood, we must create a wound on the tree. If we create Agarwood incorrectly (drill small and shallow), the wound will heal and not produce Agarwood. If we drill the tree too deep, drill into the core of the tree or drill too thickly, the tree will definitely die”.

In the world, there are many countries such as Indonesia, Malaysia, India that do not drill but use iron to hammer very thickly into the tree. When iron is hammered into the tree, it will create iron oxide and magnetic iron oxide. Iron always creates two poles, and the electric current is a directional movement of electric charges, the outside of the tree is negative and the inside of the iron is positive. This method also causes pain to the tree and creates Agarwood. However, this method is costly, and if the iron is not hammered properly, it will also kill the tree.

ATC - Khanh Hoa Aquilaria Crassna Company Limited has mastered the technology of creating Agarwood completely in accordance with nature without the use of chemicals. Another method of creating Agarwood is biologically to create the desired scent. This is the result of research from the analysis and isolation of fungi, bacteria, and viruses on Agarwood products... the special thing is that 100% of the Agarwood trees of ATC - Khanh Hoa Aquilaria Crassna Company Limited have Agarwood, with a very high yield.

As a result, Khanh Hoa Agarwood Company has been able to launch a series of Agarwood products with high quality, stability, and large quantities, meeting the needs of domestic and foreign customers.